Tracking
Created by
- MasterM
Created at
How to Connect Live Link Face
1.
Install the 'Live Link Face' app on your iPhone.
2.
Connect your iPhone to the Wi-Fi with the same IP as the PC running Virtudio
3.
Live Link Face app > Settings > Live Link > Add Target > Enter your IP value in IP address.
How to check my IP address
4.
Once you have completed the IP settings, click the 'Connect' button in the Tracking menu.
FAQ
The actor is not looking straight ahead.
Please check the iPhone mount location and calibration settings within the app.
1.
Place your iPhone on the stand according to the tips
iPhone Mount Tips:
Please place your iPhone on the lower front of your face while looking at the main monitor.
The optimal position is when you can see from the bottom of your chin to your forehead on your iPhone screen!
2.
After completing the mounting, go into the 'Live Link Face' app and proceed with calibration.
Calibration progress tips:
Please keep a straight face and look at the main monitor while filming !
Calibration process sequence :
In the 'Live Link Face' app, click the expression button (1) at the bottom right .
Click Retry Calibration (2) and look at the main monitor.
Continue shooting (3) while maintaining the status.
Once the shooting is complete, press the Save (4) button to apply the photo .
The connection attempt never ends.
If "Trying to connect!" does not disappear, check the items below.
1. Check if the Wi-Fi is the same.
If your PC is directly connected to the Internet via a cable, make sure you are using the same cable as the WiFi router.
2. Please make sure you have entered the period in the IP address.
Bad example
Correct example
3. Please check the IP of CMD.
Press the Windows key and type CMD.
In the command prompt window, type ipconfig and press enter.
Check the IP corresponding to the IPv4 address.
4. Check your WiFi speed.
I can't move my head.
If your head doesn't move, check if head rotation is turned on.
Go to Settings (1) in the 'Live Link Face' app.
Check if head rotation (2) is turned on.
Motion Capture Equipment
Data linking after wearing the equipment
Current supported devices list: Moko/XSENS