Share
Sign In

Libinput-Gestures (Touch pad gestures)

You need python 3.5 or later, python2 is not supported. You also need libinput release 1.0 or later.
You must be a member of the input group to have permission to read the touchpad device:
Installation
인풋 그룹에 현재 계정을 추가해야한다. 아래의 명령어를 실행하고 재시작 하기를 권한다.
python3 와 의존성 패키지를 설치한다.
일부 사용자 지정 구성에는 필요하지 않을 수 있지만, 대부분의/많은 사용자는 다음을 설치해야 한다. 처음에 확실하지 않은 경우 다 설치하길 권한다.
데비안, 우분투 사용자들은 libinput-tools 을 설치해야한다.
SW를 설치한다.
SW 시작
Starting AND Stopping
You must choose between starting the application as a systemd user service, or as a desktop application (with an XDG compliant DE such as GNOME and KDE). The systemd user service option for libinput-gestures was added in Feb 2021 and provides more robust management and better logging than the desktop so is the preferred choice if your system is recent and your DM/DE supports it. Note that some environments do not correctly start the systemd user service so you will have to choose the desktop option in that case.
Choose one of the two following options:
1.
To set up the application as a systemd user service:
libinput-gestures-setup service
1.
Or instead, to set up the application using your DE:
libinput-gestures-setup desktop
After choosing one of the above, you can use then run the following commands:
Enable the app to start automatically in the background when you log in with:
libinput-gestures-setup autostart
Disable the app from starting automatically with:
libinput-gestures-setup autostop
Start the app immediately in the background:
libinput-gestures-setup start
Stop the background app immediately with:
libinput-gestures-setup stop
Restart the app, e.g. to reload the configuration file, with:
libinput-gestures-setup restart
Check the status of the app with:
libinput-gestures-setup status
You can specify multiple user commands to libinput-gestures-setup to action in sequence. E.g. to shutdown and change from a desktop installation to running service installation type:
libinput-gestures-setup stop service autostart start
Note if you are starting using the desktop option and you are using some uncommon systems then libinput-gestures-setup start may fail to start the application returning you a message Don't know how to invoke libinput-gestures.desktop. If you get this error message, install the dex package, preferably from your system packages repository, and try again.
How to Use
You need python 3.5 or later, python2 is not supported. You also need libinput release 1.0 or later.
You must be a member of the input group to have permission to read the touchpad device:
Installation
인풋 그룹에 현재 계정을 추가해야한다. 아래의 명령어를 실행하고 재시작 하기를 권한다.
python3 와 의존성 패키지를 설치한다.
일부 사용자 지정 구성에는 필요하지 않을 수 있지만, 대부분의/많은 사용자는 다음을 설치해야 한다. 처음에 확실하지 않은 경우 다 설치하길 권한다.
데비안, 우분투 사용자들은 libinput-tools 을 설치해야한다.
SW를 설치한다.
SW 시작
Starting AND Stopping
You must choose between starting the application as a systemd user service, or as a desktop application (with an XDG compliant DE such as GNOME and KDE). The systemd user service option for libinput-gestures was added in Feb 2021 and provides more robust management and better logging than the desktop so is the preferred choice if your system is recent and your DM/DE supports it. Note that some environments do not correctly start the systemd user service so you will have to choose the desktop option in that case.
Choose one of the two following options:
1.
To set up the application as a systemd user service:
libinput-gestures-setup service
1.
Or instead, to set up the application using your DE:
libinput-gestures-setup desktop
After choosing one of the above, you can use then run the following commands:
Enable the app to start automatically in the background when you log in with:
libinput-gestures-setup autostart
Disable the app from starting automatically with:
libinput-gestures-setup autostop
Start the app immediately in the background:
libinput-gestures-setup start
Stop the background app immediately with:
libinput-gestures-setup stop
Restart the app, e.g. to reload the configuration file, with:
libinput-gestures-setup restart
Check the status of the app with:
libinput-gestures-setup status
You can specify multiple user commands to libinput-gestures-setup to action in sequence. E.g. to shutdown and change from a desktop installation to running service installation type:
libinput-gestures-setup stop service autostart start
Note if you are starting using the desktop option and you are using some uncommon systems then libinput-gestures-setup start may fail to start the application returning you a message Don't know how to invoke libinput-gestures.desktop. If you get this error message, install the dex package, preferably from your system packages repository, and try again.
How to Use
You need python 3.5 or later, python2 is not supported. You also need libinput release 1.0 or later.
You must be a member of the input group to have permission to read the touchpad device:
Installation
인풋 그룹에 현재 계정을 추가해야한다. 아래의 명령어를 실행하고 재시작 하기를 권한다.
python3 와 의존성 패키지를 설치한다.
일부 사용자 지정 구성에는 필요하지 않을 수 있지만, 대부분의/많은 사용자는 다음을 설치해야 한다. 처음에 확실하지 않은 경우 다 설치하길 권한다.
데비안, 우분투 사용자들은 libinput-tools 을 설치해야한다.
SW를 설치한다.
SW 시작
Starting AND Stopping
You must choose between starting the application as a systemd user service, or as a desktop application (with an XDG compliant DE such as GNOME and KDE). The systemd user service option for libinput-gestures was added in Feb 2021 and provides more robust management and better logging than the desktop so is the preferred choice if your system is recent and your DM/DE supports it. Note that some environments do not correctly start the systemd user service so you will have to choose the desktop option in that case.
Choose one of the two following options:
1.
To set up the application as a systemd user service:
libinput-gestures-setup service
1.
Or instead, to set up the application using your DE:
libinput-gestures-setup desktop
After choosing one of the above, you can use then run the following commands:
Enable the app to start automatically in the background when you log in with:
libinput-gestures-setup autostart
Disable the app from starting automatically with:
libinput-gestures-setup autostop
Start the app immediately in the background:
libinput-gestures-setup start
Stop the background app immediately with:
libinput-gestures-setup stop
Restart the app, e.g. to reload the configuration file, with:
libinput-gestures-setup restart
Check the status of the app with:
libinput-gestures-setup status
You can specify multiple user commands to libinput-gestures-setup to action in sequence. E.g. to shutdown and change from a desktop installation to running service installation type:
libinput-gestures-setup stop service autostart start
Note if you are starting using the desktop option and you are using some uncommon systems then libinput-gestures-setup start may fail to start the application returning you a message Don't know how to invoke libinput-gestures.desktop. If you get this error message, install the dex package, preferably from your system packages repository, and try again.
How to Use
You need python 3.5 or later, python2 is not supported. You also need libinput release 1.0 or later.
You must be a member of the input group to have permission to read the touchpad device:
Installation
인풋 그룹에 현재 계정을 추가해야한다. 아래의 명령어를 실행하고 재시작 하기를 권한다.
python3 와 의존성 패키지를 설치한다.
일부 사용자 지정 구성에는 필요하지 않을 수 있지만, 대부분의/많은 사용자는 다음을 설치해야 한다. 처음에 확실하지 않은 경우 다 설치하길 권한다.
데비안, 우분투 사용자들은 libinput-tools 을 설치해야한다.
SW를 설치한다.
SW 시작
Starting AND Stopping
You must choose between starting the application as a systemd user service, or as a desktop application (with an XDG compliant DE such as GNOME and KDE). The systemd user service option for libinput-gestures was added in Feb 2021 and provides more robust management and better logging than the desktop so is the preferred choice if your system is recent and your DM/DE supports it. Note that some environments do not correctly start the systemd user service so you will have to choose the desktop option in that case.
Choose one of the two following options:
1.
To set up the application as a systemd user service:
libinput-gestures-setup service
1.
Or instead, to set up the application using your DE:
libinput-gestures-setup desktop
After choosing one of the above, you can use then run the following commands:
Enable the app to start automatically in the background when you log in with:
libinput-gestures-setup autostart
Disable the app from starting automatically with:
libinput-gestures-setup autostop
Start the app immediately in the background:
libinput-gestures-setup start
Stop the background app immediately with:
libinput-gestures-setup stop
Restart the app, e.g. to reload the configuration file, with:
libinput-gestures-setup restart
Check the status of the app with:
libinput-gestures-setup status
You can specify multiple user commands to libinput-gestures-setup to action in sequence. E.g. to shutdown and change from a desktop installation to running service installation type:
libinput-gestures-setup stop service autostart start
Note if you are starting using the desktop option and you are using some uncommon systems then libinput-gestures-setup start may fail to start the application returning you a message Don't know how to invoke libinput-gestures.desktop. If you get this error message, install the dex package, preferably from your system packages repository, and try again.
How to Use
You need python 3.5 or later, python2 is not supported. You also need libinput release 1.0 or later.
You must be a member of the input group to have permission to read the touchpad device:
Installation
인풋 그룹에 현재 계정을 추가해야한다. 아래의 명령어를 실행하고 재시작 하기를 권한다.
python3 와 의존성 패키지를 설치한다.
일부 사용자 지정 구성에는 필요하지 않을 수 있지만, 대부분의/많은 사용자는 다음을 설치해야 한다. 처음에 확실하지 않은 경우 다 설치하길 권한다.
데비안, 우분투 사용자들은 libinput-tools 을 설치해야한다.
SW를 설치한다.
SW 시작
Starting AND Stopping
You must choose between starting the application as a systemd user service, or as a desktop application (with an XDG compliant DE such as GNOME and KDE). The systemd user service option for libinput-gestures was added in Feb 2021 and provides more robust management and better logging than the desktop so is the preferred choice if your system is recent and your DM/DE supports it. Note that some environments do not correctly start the systemd user service so you will have to choose the desktop option in that case.
Choose one of the two following options:
1.
To set up the application as a systemd user service:
libinput-gestures-setup service
1.
Or instead, to set up the application using your DE:
libinput-gestures-setup desktop
After choosing one of the above, you can use then run the following commands:
Enable the app to start automatically in the background when you log in with:
libinput-gestures-setup autostart
Disable the app from starting automatically with:
libinput-gestures-setup autostop
Start the app immediately in the background:
libinput-gestures-setup start
Stop the background app immediately with:
libinput-gestures-setup stop
Restart the app, e.g. to reload the configuration file, with:
libinput-gestures-setup restart
Check the status of the app with:
libinput-gestures-setup status
You can specify multiple user commands to libinput-gestures-setup to action in sequence. E.g. to shutdown and change from a desktop installation to running service installation type:
libinput-gestures-setup stop service autostart start
Note if you are starting using the desktop option and you are using some uncommon systems then libinput-gestures-setup start may fail to start the application returning you a message Don't know how to invoke libinput-gestures.desktop. If you get this error message, install the dex package, preferably from your system packages repository, and try again.
How to Use
You need python 3.5 or later, python2 is not supported. You also need libinput release 1.0 or later.
You must be a member of the input group to have permission to read the touchpad device:
Installation
인풋 그룹에 현재 계정을 추가해야한다. 아래의 명령어를 실행하고 재시작 하기를 권한다.
python3 와 의존성 패키지를 설치한다.
일부 사용자 지정 구성에는 필요하지 않을 수 있지만, 대부분의/많은 사용자는 다음을 설치해야 한다. 처음에 확실하지 않은 경우 다 설치하길 권한다.
데비안, 우분투 사용자들은 libinput-tools 을 설치해야한다.
SW를 설치한다.
SW 시작
Starting AND Stopping
You must choose between starting the application as a systemd user service, or as a desktop application (with an XDG compliant DE such as GNOME and KDE). The systemd user service option for libinput-gestures was added in Feb 2021 and provides more robust management and better logging than the desktop so is the preferred choice if your system is recent and your DM/DE supports it. Note that some environments do not correctly start the systemd user service so you will have to choose the desktop option in that case.
Choose one of the two following options:
1.
To set up the application as a systemd user service:
libinput-gestures-setup service
1.
Or instead, to set up the application using your DE:
libinput-gestures-setup desktop
After choosing one of the above, you can use then run the following commands:
Enable the app to start automatically in the background when you log in with:
libinput-gestures-setup autostart
Disable the app from starting automatically with:
libinput-gestures-setup autostop
Start the app immediately in the background:
libinput-gestures-setup start
Stop the background app immediately with:
libinput-gestures-setup stop
Restart the app, e.g. to reload the configuration file, with:
libinput-gestures-setup restart
Check the status of the app with:
libinput-gestures-setup status
You can specify multiple user commands to libinput-gestures-setup to action in sequence. E.g. to shutdown and change from a desktop installation to running service installation type:
libinput-gestures-setup stop service autostart start
Note if you are starting using the desktop option and you are using some uncommon systems then libinput-gestures-setup start may fail to start the application returning you a message Don't know how to invoke libinput-gestures.desktop. If you get this error message, install the dex package, preferably from your system packages repository, and try again.
How to Use
You need python 3.5 or later, python2 is not supported. You also need libinput release 1.0 or later.
You must be a member of the input group to have permission to read the touchpad device:
Installation
인풋 그룹에 현재 계정을 추가해야한다. 아래의 명령어를 실행하고 재시작 하기를 권한다.
python3 와 의존성 패키지를 설치한다.
일부 사용자 지정 구성에는 필요하지 않을 수 있지만, 대부분의/많은 사용자는 다음을 설치해야 한다. 처음에 확실하지 않은 경우 다 설치하길 권한다.
데비안, 우분투 사용자들은 libinput-tools 을 설치해야한다.
SW를 설치한다.
SW 시작
Starting AND Stopping
You must choose between starting the application as a systemd user service, or as a desktop application (with an XDG compliant DE such as GNOME and KDE). The systemd user service option for libinput-gestures was added in Feb 2021 and provides more robust management and better logging than the desktop so is the preferred choice if your system is recent and your DM/DE supports it. Note that some environments do not correctly start the systemd user service so you will have to choose the desktop option in that case.
Choose one of the two following options:
1.
To set up the application as a systemd user service:
libinput-gestures-setup service
1.
Or instead, to set up the application using your DE:
libinput-gestures-setup desktop
After choosing one of the above, you can use then run the following commands:
Enable the app to start automatically in the background when you log in with:
libinput-gestures-setup autostart
Disable the app from starting automatically with:
libinput-gestures-setup autostop
Start the app immediately in the background:
libinput-gestures-setup start
Stop the background app immediately with:
libinput-gestures-setup stop
Restart the app, e.g. to reload the configuration file, with:
libinput-gestures-setup restart
Check the status of the app with:
Made with SlashPage